1.75mm PLA me te kakawaea PLA pro mo te ta 3D
Nga waahanga hua
| Waitohu | Torwell |
| Rauemi | PLA moni whakakē (NatureWorks 4032D / Total-Corbion LX575) |
| Diamita | 1.75mm/2.85mm/3.0mm |
| Te taumaha kupenga | 1 Kg/spool;250g/spool;500g/spool;3kg/spool;5kg/spool;10kg/spool |
| Te taumaha kerekere | 1.2Kg/spool |
| Te manawanui | ± 0.03mm |
| Te roa | 1.75mm(1kg) = 325m |
| Taiao Rokiroki | He maroke me te hau |
| Tautuhinga whakamaroke | 55˚C mō te 6 hāora |
| Nga rauemi tautoko | Tonoa me Torwell HIPS, Torwell PVA |
| Whakaaetanga Tiwhikete | CE, MSDS, Reach, FDA, TUV, SGS |
| Hototahi ki | Makerbot, UP, Felix, Reprap, Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker me etahi atu kaituhi FDM 3D |
| Mōkī | 1kg/spool;8spools/ctn or 10spools/ctn peeke kirihou hiri me te whakamaroke |
Ētahi atu Tae
Tae Wātea:
| Tae taketake | Ma, Pango, Whero, Kahurangi, Kowhai, Kakariki, Hiriwa, Kerei, Karaka, Koura |
| Tetahi atu tae | Kei te waatea te tae kua whakaritea |
Whakaaturanga Tauira
Tiwhikete
ROHS;REACH;SGS;MSDS;
Mōkī
1kg te kakawaea PLA+ me te whakamaroke i roto i te kete korehau Ko ia poro i roto i te pouaka takitahi (pouaka Torwell, Pouaka Kotiti, pouaka Whakaritea ranei ka taea) 8 pouaka mo ia kaata (rahi kaata 44x44x19cm)
Whare wheketere
Nga huarahi tuku
Mo te tauira, te whakamatautau, te ota ohorere ranei, ka whakamahia te tuku korero, te tuku hau ranei.Ahakoa mo te ota nui, ka tukuna ma te moana.Ka tūtohu matou ki a koe te huarahi tino pai ka whakawhirinaki ki to rahinga me to wa tuku.
Contact with us via email info@torwell3d.com or whatsapp +13798511527.
Ka urupare matou ki a koe i roto i nga haora 12.
| Kiato | 1.23 g/cm3 |
| Taurangi Rere Rere(g/10min) | 5（190℃/2.16kg） |
| Wera Distortion Temp | 53℃, 0.45MPa |
| Te Kaha Toka | 65 MPa |
| Elongation at Break | 20% |
| Te Kaha Toka | 75 MPa |
| Kōwae Takahuri | 1965 MPa |
| IZOD Te Kaha Paanga | 9kJ/㎡ |
| Te mauroa | 4/10 |
| Te Taatanga | 9/10 |
| Te Mahana Whakaputa (℃) | 200 – 230 ℃E taunaki ana kia 215 ℃ |
| Te pāmahana moenga(℃) | 45 – 60°C |
| Rahi pupuha | ≥0.4mm |
| Tere Tere | I runga 100% |
| Tere tā | 40 – 100mm/s |
| Moenga Wehana | Kōwhiringa |
| Nga Mata Hangaia | Karaehe ki te kāpia, Pepa huna, Tape Kahurangi, BuilTak, PEI |
Tuhia to korero ki konei ka tukuna mai ki a matou
