Hiraka Whitiwhiti Tere Rōnaki Tae Huri Aniwaniwa Tae 3D Pūreretā PLA Filament
Nga waahanga hua
Ko te ahua ahurei o Torwell aniwaniwa hiraka PLA kakawaua ko tona paanga tae aniwaniwa.Ko te papanga he ranunga o te PLA me etahi atu matū, ka puta he hua rōnaki o te maha o nga tae ki runga i te mea kua taia, he pai mo te mahi toi me nga taonga whakapaipai.I tua atu, ko te Torwell rainbow multicolor hiraka PLA filament he tino pai nga ahuatanga miihini me te mata kanapa, e whakarite ana i te kounga teitei me te roa o te whakamahinga o te mea kua taia.
| Waitohu | Torwell |
| Rauemi | polymer composites Pearlescent PLA (NatureWorks 4032D) |
| Diamita | 1.75mm/2.85mm/3.0mm |
| Te taumaha kupenga | 1 Kg/spool;250g/spool;500g/spool;3kg/spool;5kg/spool;10kg/spool |
| Te taumaha kerekere | 1.2Kg/spool |
| Te manawanui | ± 0.03mm |
| Te roa | 1.75mm(1kg) = 325m |
| Taiao Rokiroki | He maroke me te hau |
| Tautuhinga whakamaroke | 55˚C mo te 6 haora |
| Nga rauemi tautoko | Tonoa me Torwell HIPS, Torwell PVA |
| Whakaaetanga Tiwhikete | CE, MSDS, Reach, FDA, TUV me SGS |
| Hototahi ki | Reprap, Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, Bambu Lab X1, AnkerMaker me etahi atu kaituhi 3D FDM |
Whakaaturanga Tauira
Ko te Hiraka Motuhake Rainbow Maha Tae:
He Tae Rōnaki, Huri noa i ia 3 - 5 mita te huri i te tae, ka huri noa mai i tetahi tae ki tetahi atu;He mea whakamiharo ki te ta i nga mea maha o nga tae ahurei i roto i te kawa kawa kotahi e tautoko ana i to auahatanga me to hoahoa i roto i te ao tā 3D Tino pai!
Tiwhikete:
ROHS;REACH;SGS;MSDS;TUV
| Kiato | 1.21 g/cm3 |
| Taurangi Rere Rere(g/10min) | 4.7（190℃/2.16kg） |
| Wera Distortion Temp | 52℃, 0.45MPa |
| Te Kaha Toka | 72 MPa |
| Elongation at Break | 14.5% |
| Te Kaha Toka | 65 MPa |
| Kōwae Takahuri | 1520 MPa |
| IZOD Te Kaha Paanga | 5.8kJ/㎡ |
| Te mauroa | 4/10 |
| Te Taatanga | 9/10 |
1. Hei whakatutuki i te painga pai o te tuhi me te kakawaua PLA hiraka maha-a-aniwaniwa, e taunaki ana kia whakamahia te diameter pupuha o te 0.4 mm iti ake ranei.Ka taea e nga diameter nozzle iti ake te pai ake o nga korero me te kounga o te mata.Kei waenganui i te 200-220°C te pāmahana tā e tūtohu ana, me te pāmahana moenga kei waenganui i te 45-65°C.Ko te tere tā tino pai kei te 50-60 mm/s, me te teitei o te paparanga kei waenganui i te 0.1-0.2 mm.
2. Me whakatika te pito kakawaea i muri i ia wa e whakamahia ana, penei me te whakauru i te pito kore o te kakawaea ki roto i te poka kia kore ai te kakawaea e whiria mo te whakamahi a muri ake nei.
3. Kia roa ake ai te ora o to kakawaea, rongoatia ki roto i te putea maroke, hiri, pouaka ranei.
| Paemahana Extruder(℃) | 190 – 230℃E taunaki ana 215℃ |
| Te pāmahana moenga(℃) | 45 – 65°C |
| Note rahi o te mata | 0.4mm |
| Tere Tere | I runga 100% |
| Tere tā | 40 – 100mm/s |
| Moenga Wehana | Kōwhiringa |
| Nga Mata Hangaia | Karaehe ki te kāpia, Pepa huna, Tape Kahurangi, BuilTak, PEI |
Nga Tohu Taa:
1) Hei whakatutuki i te painga pai o te tuhi me te kakawaua PLA hiraka maha-a-aniwaniwa, e taunaki ana kia whakamahia te diameter nozzle o te 0.4 mm iti ake ranei.Ka taea e nga diameter nozzle iti ake te pai ake o nga korero me te kounga o te mata.Kei waenganui i te 200-220°C te pāmahana tā e tūtohu ana, me te pāmahana moenga kei waenganui i te 45-65°C.Ko te tere tā tino pai kei te 50-60 mm/s, me te teitei o te paparanga kei waenganui i te 0.1-0.2 mm.
2) Me whakatika te pito kakawaea i muri i ia wa e whakamahia ana, penei me te whakauru i te pito kore o te kakawaea ki roto i te poka kia kore ai te kakawaea e whiria mo te whakamahi a muri ake nei.
3) Kia roa ake te ora o to kakawaea, rongoatia ki roto i te putea maroke, kua hirihia, pouaka ranei.
