Hiraka PLA 3D Filament Me te Mata Tianarama, 1.75mm 1KG/Spool
Nga waahanga hua
Ko te ahuatanga motuhake o te kakawaea ta PLA hiraka Torwell ko tona ahua maeneene me te kanapa, he rite ki te kakano o te hiraka.Ko tenei kakawaea he whakakotahitanga ahurei o te PLA me etahi atu rawa e whakarato ana i te mutunga kanapa ki te mea kua taia.I tua atu, he pai rawa nga taonga miihini PLA hiraka, tae atu ki te kaha kaha, te ngawari, me te pai o te piri o te paparanga, e whakarite ana i te mauroa me te roa o nga mea kua taia.
| Waitohu | Torwell |
| Rauemi | polymer composites Pearlescent PLA (NatureWorks 4032D) |
| Diamita | 1.75mm/2.85mm/3.0mm |
| Te taumaha kupenga | 1 Kg/spool;250g/spool;500g/spool;3kg/spool;5kg/spool;10kg/spool |
| Te taumaha kerekere | 1.2Kg/spool |
| Te manawanui | ± 0.03mm |
| Te roa | 1.75mm(1kg) = 325m |
| Taiao Rokiroki | He maroke me te hau |
| Tautuhinga whakamaroke | 55˚C mo te 6 haora |
| Nga rauemi tautoko | Tonoa me Torwell HIPS, Torwell PVA |
| Whakaaetanga Tiwhikete | CE, MSDS, Reach, FDA, TUV me SGS |
| Hototahi ki | Reprap, Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, Bambu Lab X1, AnkerMaker me etahi atu kaituhi 3D FDM |
Ētahi atu Tae
Tae wātea:
| Tae taketake | Ma, Pango, Whero, Kahurangi, Kowhai, Kakariki, Hiriwa, Kerei, Koura, Karaka, Mawhero |
| Whakaaetia te Tae PMS Kiritaki | |
I hangaia i runga i te punaha Tae Paerewa:
Ko nga kakawaea tae katoa ka hangaia e matou ka hangaia kia rite ki te punaha tae paerewa penei i te Pantone Color Matching System.He mea nui tenei kia rite ai te whakamarumaru o te tae ki ia puranga me te tuku i a maatau ki te whakaputa tae motuhake penei i nga tae whakarewa me nga tae ritenga.
Whakaaturanga Tauira
Mōkī
Taipitopito kete:
1kg pukapuka Hiraka kakawaua me te whakamaroke i roto i te kete korehau.
Ia poro i roto i te pouaka takitahi (pouaka Torwell, Pouaka Neutral, pouaka Whakaritea ranei e waatea ana).
8 pouaka mo ia kaata (kaata rahi 44x44x19cm).
Ko te rokiroki tika o te kakawaea PLA hiraka he mea nui hei pupuri i ona rawa me te kounga.E taunaki ana kia penapenahia te kakawaea ki tetahi waahi makariri, maroke atu i te ra tika me te makuku.Ko te makuku ki te makuku ka paheke te rauemi, ka pa ki te kounga o te tuhinga.Na reira, he mea tika kia penapena nga taonga ki roto i te ipu hiri me nga kete whakamaroke hei aukati i te makuku.
Tiwhikete:
ROHS;REACH;SGS;MSDS;TUV
| Kiato | 1.21 g/cm3 |
| Taurangi Rere Rere(g/10min) | 4.7（190℃/2.16kg） |
| Wera Distortion Temp | 52℃, 0.45MPa |
| Te Kaha Toka | 72 MPa |
| Elongation at Break | 14.5% |
| Te Kaha Toka | 65 MPa |
| Kōwae Takahuri | 1520 MPa |
| IZOD Te Kaha Paanga | 5.8kJ/㎡ |
| Te mauroa | 4/10 |
| Te Taatanga | 9/10 |
Wme whiriwhiri koe i te kakawaea Torwell Silk PLA 3D?
1. Torwell hiraka PLA kakawaua kei roto i ona rerehua pai.Ka whakatauritea ki nga taonga PLA tuku iho, he maeneene te mata o te kakawaea PLA hiraka, ka puta he ahua tino maeneene i runga i te tauira kua taia.I tua atu, ko te hiraka PLA filament he maha nga momo tae hei whiriwhiri mai hei ta i te tauira.
2.Ko te ahuatanga o te kakawaea Torwell Silk PLA ko ona taonga miihini kaha.Ehara i te mea he pai te kaha me te kaha piko, engari he pai te mahi ki te piko me te korikori.Ma tenei ka tino pai te kakawaea PLA hiraka mo te tuhi i etahi mea e hiahia ana ki te mahi miihini teitei, penei i te hoahoa ahumahi, nga waahanga miihini, me era atu.
3.Torwell Silk PLA filament he pai hoki te parenga wera me te pumau matū.Ko te nui o te 55 ° C, ka taea te mahi i roto i nga taiao teitei o te wera, a he pai te aukati ki te UV me te waikura matū.
4.Ko te painga o Torwell Silk PLA filament ko tona ngawari ki te tuhi me te tukatuka.Ka whakatauritea ki etahi atu rawa, he pai te rere me te piri o te kakawaea Torwell Silk PLA, he tino ngawari ki te tukatuka.I roto i te tukanga tā, karekau he raruraru ki te purua, ki te taka ranei.I te wa ano, ka taea hoki te taia te kakawaea PLA hiraka ma te whakamahi i te nuinga o nga miihini FDM 3D, na te mea e tika ana ki nga momo tono ta 3D.
| Paemahana Extruder(℃) | 190 – 230℃E taunaki ana 215℃ |
| Te pāmahana moenga(℃) | 45 – 65°C |
| Note rahi o te mata | ≥0.4mm |
| Tere Tere | I runga 100% |
| Tere tā | 40 – 100mm/s |
| Moenga Wehana | Kōwhiringa |
| Nga Mata Hangaia | Karaehe ki te kāpia, Pepa huna, Tape Kahurangi, BuilTak, PEI |
Kia mahara:
He rite nga tautuhinga ta mo te Hiraka PLA Filament ki era mo te PLA tuku iho.Kei waenganui i te 190-230°C te pāmahana tā e tūtohutia ana, me te pāmahana moenga kei waenganui i te 45-65°C.Ko te tere tā tino pai ko a tawhio noa 40-80 mm/s, me te teitei paparanga kia i waenganui i 0.1-0.2mm.Engari, he mea nui kia mohio koe ka rereke pea enei tautuhinga i runga i te taputapu 3D motuhake e whakamahia ana, a ka tūtohu kia whakatikahia nga tautuhinga kia rite ki nga tohutohu a te kaihanga.
Ki te whakatutuki i nga hua pai ki te hiraka PLA kakawaua tā, e tūtohu ana ki te whakamahi i te pupuha ki te diameter o 0.4 mm iti ranei.He iti ake te diameter o te puha e awhina ana ki te whakatutuki i nga korero pai me te pai ake o te kounga o te mata.I tua atu, e taunaki ana kia whakamahi i te powhiriwhiri whakamatao i te wa o te mahi ta kia kore ai e pakaru me te whakapai ake i te kounga o te tuhinga.
