Tā 3D Puata PLA Filament
| Waitohu | Torwell |
| Rauemi | PLA Paerewa (NatureWorks 4032D / Total-Corbion LX575) |
| Diamita | 1.75mm/2.85mm/3.0mm |
| Te taumaha kupenga | 1 Kg/spool;250g/spool;500g/spool;3kg/spool;5kg/spool;10kg/spool |
| Te taumaha kerekere | 1.2Kg/spool |
| Te manawanui | ± 0.02mm |
| Taiao Rokiroki | He maroke me te hau |
| Tautuhinga whakamaroke | 55˚C mō te 6 hāora |
| Nga rauemi tautoko | Tonoa me Torwell HIPS, Torwell PVA |
| Whakaaetanga Tiwhikete | CE, MSDS, Reach, FDA, TUV me SGS |
| Hototahi ki | Makerbot, UP, Felix, Reprap, Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker me etahi atu kaituhi FDM 3D |
| Mōkī | 1kg/spool;8spools/ctn or 10spools/ctnpeeke kirihou hiri me te whakamaroke |
Ētahi atu Tae
Tae Wātea:
| Tae taketake | Ma, Pango, Whero, Kahurangi, Kowhai, Kakariki, Nature, |
| Tetahi atu tae | Hiriwa, Hina, Kiri, Koura, Mawhero, Papura, Karaka, Kowhai-koura, Rakau, Kirihimete matomato, tupuni kahurangi, Rangi kahurangi, Puata |
| Ko te raupapa korakora | Korekōrero Whero, Korekōrero Kōwhai, Korekōrero Kākāriki, Korekōrero Kahurangi |
| Te raupapa maramara | Maamaa Kakariki, Maamaa Kahurangi |
| He raupapa huringa tae | Kahurangi kakariki ki te kowhai kakariki, Kahurangi ki te ma, Papura ki te Mawhero, Kerei ki te Ma |
| Whakaaetia te Tae PMS Kiritaki | |
Whakaaturanga Tauira
Mōkī
1kg te pukapuka Kawau PLA Puata me te whakamaroke i roto i te kete korehau.
Ia poro i roto i te pouaka takitahi (pouaka Torwell, Pouaka Neutral, pouaka Whakaritea ranei e waatea ana).
8 pouaka mo ia kaata (kaata rahi 44x44x19cm).
Kamupene
FAQ
A: He kaihanga matou mo te kakawaea 3D neke atu i te 10 tau i Haina.
A: North Amercia, South Amercia, Europe, Africa, Asia etc.
A: I te nuinga o nga ra 3-5 mo te tauira, te raupapa iti ranei.7-15 ra i muri i te whiwhinga moni mo te ota nui.Ka whakaū i nga korero mo te wa arahi ina tuu koe i te ota.
A: Ngaio kaweake tarapēke:
1) Pouaka tae Torwell
2) Tarapu kūpapa kahore tetahi korero kamupene
3) Ko taau ake pouaka tohu kia rite ki to tono.
A: 1) I te wa e tukatuka ana, ka tirotirohia e te kaimahi miihini mahi te kounga o raatau.
2) I muri i te mutunga o te prodction, ka whakaatu ki a QA mo te tirotiro katoa.
3) I mua i te tuku, ka tirotirohia e te QA kia rite ki te paerewa tirotiro tauira ISO mo te hanga papatipu.Ka 100% te tirotiro katoa mo te QTY iti.
A: EX-WORKS, FOB, CIF, C&F, DDP, DDU , etc
| Kiato | 1.24 g/cm3 |
| Taurangi Rere Rere(g/10min) | 3.5（190℃/2.16kg） |
| Wera Distortion Temp | 53℃, 0.45MPa |
| Te Kaha Toka | 72 MPa |
| Elongation at Break | 11.8% |
| Te Kaha Toka | 90 MPa |
| Kōwae Takahuri | 1915 MPa |
| IZOD Te Kaha Paanga | 5.4kJ/㎡ |
| Te mauroa | 4/10 |
| Te Taatanga | 9/10 |
| Paemahana Extruder(℃) | 190 – 220℃E taunaki ana 215℃ |
| Te pāmahana moenga(℃) | 25 – 60°C |
| Rahi pupuha | ≥0.4mm |
| Tere Tere | I runga 100% |
| Tere tā | 40 – 100mm/s |
| Moenga Wehana | Kōwhiringa |
| Nga Mata Hangaia | Karaehe ki te kāpia, Pepa huna, Tape Kahurangi, BuilTak, PEI |
