PETG kakawaua 3D matomato mo te FDM 3D pūreretā
Nga waahanga hua
| Brand | Torwell |
| Rauemi | SkyGreen K2012/PN200 |
| Diamita | 1.75mm/2.85mm/3.0mm |
| Te taumaha kupenga | 1 Kg/spool;250g/spool;500g/spool;3kg/spool;5kg/spool;10kg/spool |
| Te taumaha kerekere | 1.2Kg/spool |
| Te manawanui | ± 0.02mm |
| Length | 1.75mm(1kg) = 325m |
| Taiao Rokiroki | He maroke me te hau |
| DTautuhinga rying | 65˚C mō te 6h |
| Nga rauemi tautoko | Tonoa meTorwell HIPS, Torwell PVA |
| CWhakaaetanga tiwhikete | CE, MSDS, Reach, FDA, TUV, SGS |
| Hototahi ki | Makerbot, UP, Felix, Reprap, Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker me etahi atu kaituhi 3D FDM |
| Mōkī | 1kg/spool;8spools/ctn or 10spools/ctn peeke kirihou hiri me te whakamaroke |
Ētahi atu Tae
Tae Wātea
| Tae taketake | Ma, Pango, Whero, Kahurangi, Kowhai, Kakariki, Kerei, Hiriwa, Karaka, Puataata |
| Tetahi atu tae | Kei te waatea te tae kua whakaritea |
Whakaaturanga Tauira
Mōkī
1kg pukapuka kakawaua 3D PETG me te whakamaroke i roto i te kete korehau.
Ia poro i roto i te pouaka takitahi (pouaka Torwell, Pouaka Neutral, pouaka Whakaritea ranei e waatea ana).
8 pouaka mo ia kaata (kaata rahi 44x44x19cm).
Whare wheketere
Ētahi atu korero
Kakariki 3D Filament PETG mo FDM 3D Pūreretā - te tāpiritanga tino pai ki to kete ta 3D.He mea hanga mai i te polyethylene terephthalate tenei kawauwau, e kiia ana ko PETG, he rauemi coplyester e mohiotia ana mo tona uaua me te ngawari o te whakamahi.
Ko tetahi o nga ahuatanga tino pai o tenei kakawaea ko tona atete ki te weriweri me te pokanoa, he raru noa i te whakamahi i etahi atu rauemi.Ma te PETG kakawaea 3D matomato, ka taea e koe te parekareka ki te wheako tuhi kore ahotea me te kore e awangawanga mo te delamination me etahi atu take.
I tua atu i te pono, ko te kakawaea kua whakaaetia e te FDA, te tikanga he haumaru mo te whakamahi i nga tono e pa ana ki te kai.I tua atu, he pai ki te taiao, he mea tino pai mo nga kaihoko e awangawanga ana mo te paanga o a raatau mahi ki te ao.
Ko tetahi o nga mea nui mo te PETG 3D Filament Green he tino whai kiko - ka taea te whakamahi ki te hanga i nga momo kaupapa ta, tae atu ki nga tauira, kii, tae atu ki nga taonga mahi penei i nga keehi waea me nga whakapaipai.Ko tana taumata teitei o te mauroa he pai hoki mo te hanga i nga waahanga e tika ana kia kaha, kia mau tonu.
He ngawari te tuhi me tenei kakawaea.Ka taea te whakakore i te 220-250°C me te hototahi ki te nuinga o nga kaituhi 3D FDM i runga i te maakete.I tua atu, ko te tae matomato kanapa ka taapiri atu i te ngahau me te hopu kanohi ki o taa.
Ko te katoa, ko te PETG Kawau 3D Kakariki mo nga Kairereta 3D FDM he whiriwhiri pai mo te hunga e rapu ana i te kakawaua tuhi 3D pono, ngawari hoki ki te whakamahi.Na te pai o ana mahi, te pai o te taiao, me nga tae kanapa, he tino pai ki te hunga timata me te hunga kaingākau ki te tā 3D.
| Kiato | 1.27 g/cm3 |
| Taurangi Rere Rere(g/10min) | 20（250℃/2.16kg） |
| Wera Distortion Temp | 65℃, 0.45MPa |
| Te Kaha Toka | 53 MPa |
| Elongation at Break | 83% |
| Te Kaha Toka | 59.3MPa |
| Kōwae Takahuri | 1075 MPa |
| IZOD Te Kaha Paanga | 4.7kJ/㎡ |
| Te mauroa | 8/10 |
| Te Taatanga | 9/10 |
| Te Mahana Whakaputa (℃) | 230 – 250 ℃ E taunaki ana kia 240 ℃ |
| Te pāmahana moenga(℃) | 70 – 80°C |
| Rahi pupuha | ≥0.4mm |
| Tere Tere | HEI mo te kounga o te mata pai ake / OFF mo te kaha ake |
| Tere tā | 40 – 100mm/s |
| Moenga Wehana | E hiahiatia ana |
| Nga Mata Hangaia | Karaehe ki te kāpia, Pepa huna, Tape Kahurangi, BuilTak, PEI |
