Tae Tärua Hiraka PLA 3D Filament, Pearlescent 1.75mm, Coextrusion Aniwaniwa
Nga waahanga hua
Torwell Taarua Tae Coextrusion Filament
He rereke mai i te huringa tae noa o te kakawaea PLA kopere, ia inihi o tenei kakawaua 3d makutu he mea hanga ki nga tae takirua.Na reira, ka ngawari te tiki i nga tae katoa, ahakoa mo nga taarua iti.
Nga Taipitopito Tino Maeneene me te kanapa
Ko te take he ataahua te ahua o tenei kakawaea pūreretā 3D ko te mata kakawaua PLA hiraka whakamiharo.
| Brand | Torwell |
| Rauemi | polymer composites Pearlescent PLA (NatureWorks 4032D |
| Diamita | 1.75mm |
| Te taumaha kupenga | 1Kg/spool;250g/spool;500g/spool; |
| Te taumaha kerekere | 1.2Kg/spool |
| Te manawanui | ± 0.03mm |
| Length | 1.75mm(1kg) = 325m |
| Taiao Rokiroki | He maroke me te hau |
| Tautuhinga whakamaroke | 55˚C mō te 6 hāora |
| Nga rauemi tautoko | Tonoa meTorwell HIPS, Torwell PVA |
| Whakaaetanga Tiwhikete | CE, MSDS, Reach, FDA, TUV me SGS |
| Hototahi ki | Makerbot, UP, Felix, Reprap, Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker me etahi atu kaituhi 3D FDM |
| Mōkī | 1kg/spool;8spools/ctn or 10spools/ctnpeeke kirihou hiri me te whakamaroke |
Ētahi atu Tae
Tae wātea:
| Tae taketake | Ma, Pango, Whero, Kahurangi, Kowhai, Kakariki, Hiriwa, Kerei, Koura, Karaka, Mawhero |
| Whakaaetia te Tae PMS Kiritaki | |
Whakaaturanga Tauira
Mōkī
Whare wheketere
Torwell, he kaihanga tino pai me te neke atu i te 10 tau nga wheako mo te kakawaea ta 3D.
FAKATOKANGA
• Kia poutū te kakawaea kia kore e korikori.
• Na te rama pupuhi, te taumira whakaatu ranei, he iti te atarangi o te tae i waenga i nga pikitia me nga kakawaea.
• He iti noa te rereketanga i waenga i nga roopu rereke, na reira ka tūtohu kia nui te hoko kawa i te wa kotahi.
FAQ
A: Whakapumautia kua whakatauritehia te papa, he tika te tawhiti i waenga i te puha me te mata o te papa, kia paku paku te waea e puta mai ana i te puha.
B: Tirohia te pāmahana tā me te tautuhinga pāmahana o te moenga wera.Ko te 190-220°C te pāmahana tā e tūtohu ana, ko te pāmahana moenga wera ko te 40°C.
C: Ko te mata o te papa e hiahia ana ki te horoi, ka taea ranei e koe te whakamahi i te mata motuhake, te kapia, te makawe makawe me etahi atu.
D: He rawakore te adhesion o te paparanga tuatahi, ka taea te whakapai ake ma te whakanui ake i te whanui o te raina extrusion o te paparanga tuatahi me te whakaiti i te tere o te tuhi.
A: Ko te uaua o te hiraka pla he iti ake i te PLA, na te rereke o te tauira.
B: Ka taea e koe te whakanui ake i te pāmahana me te maha o nga pakitara o waho kia pai ake ai te whakapiri paparanga.
C. kia maroke te kakawaea kia kore e pakaru.
A: Ka taea e te pāmahana teitei te whakanui ake i te rere o te kakawaea i muri i te rewa, ka whakaaro matou ki te whakaiti i te pāmahana hei whakaiti i te aho.
B: Ka kitea e koe te tawhiti pai rawa atu me te tere tangohanga ma te tuhi i te whakamatautau aho.
A: Me whakauru te pito kore utu o te kakawaenga hiraka ki roto i nga rua kia kore ai e whiri a muri ake nei.
A: Me mohio kei te rongoa te kakawaea ki roto i te peeke hiri, pouaka ranei i muri i ia tuhinga kia kore ai te makuku.
B: Mēnā kua whakamakuku kē te kakawaea i te makuku, whakamarokehia ki te oumu 4 – 6 haora i te 40-45°C.
| Kiato | 1.25g/cm3 |
| Taurangi Rere Rere(g/10min) | 11.3（190℃/2.16kg） |
| Wera Distortion Temp | 55℃, 0.45MPa |
| Te Kaha Toka | 57MPa |
| Elongation at Break | 21.5% |
| Te Kaha Toka | 78MPa |
| Kōwae Takahuri | 2700 MPa |
| IZOD Te Kaha Paanga | 6.3kJ/㎡ |
| Te mauroa | 4/10 |
| Te Taatanga | 9/10 |
| Paemahana Extruder(℃) | 190 – 220℃E taunaki ana≤200℃kia pai ake te kanapa |
| Te pāmahana moenga(℃) | 0 – 60°C |
| Note rahi o te mata | ≥0.4mm |
| Tere Tere | I runga 100% |
| Tere tā | 30 –60mm/s;25-45mm/s mo te mea uaua, 45-60mm/s mo te mea ngawari |
| LAyer Teitei | 0.2mm |
| Moenga Wehana | Kōwhiringa |
| Nga Mata Hangaia | Karaehe ki te kāpia, Pepa huna, Tape Kahurangi, BuilTak, PEI |
