PETG Filament Grey mō te tā 3D
Nga waahanga hua
| Waitohu | Torwell |
| Rauemi | SkyGreen K2012/PN200 |
| Diamita | 1.75mm/2.85mm/3.0mm |
| Te taumaha kupenga | 1 Kg/spool;250g/spool;500g/spool;3kg/spool;5kg/spool;10kg/spool |
| Te taumaha kerekere | 1.2Kg/spool |
| Te manawanui | ± 0.02mm |
| Te roa | 1.75mm(1kg) = 325m |
| Taiao Rokiroki | He maroke me te hau |
| Tautuhinga whakamaroke | 65˚C mō te 6h |
| Nga rauemi tautoko | Tonoa me Torwell HIPS, Torwell PVA |
| Whakaaetanga Tiwhikete | CE, MSDS, Reach, FDA, TUV, SGS |
| Hototahi ki | Makerbot, UP, Felix, Reprap, Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker me etahi atu kaituhi FDM 3D |
| Mōkī | 1kg/spool;8spools/ctn or 10spools/ctnpeeke kirihou hiri me te whakamaroke |
Ētahi atu Tae
Tae Wātea
| Tae taketake | Ma, Pango, Whero, Kahurangi, Kowhai, Kakariki, Kerei, Hiriwa, Karaka, Puataata |
| Tetahi atu tae | Kei te waatea te tae kua whakaritea |
Whakaaturanga Tauira
Mōkī
1kg te kakawaua PETG me te whakamaroke i roto i te kete korehau.
Ia poro i roto i te pouaka takitahi (pouaka Torwell, Pouaka Neutral, pouaka Whakaritea ranei e waatea ana).
8 pouaka mo ia kaata (kaata rahi 44x44x19cm).
Whare wheketere
Ētahi atu korero
Ko te PETG Filament Grey he hua hurihuri e whakakotahi ana i nga huanga pai rawa atu o nga kakawaua 3D rongonui e rua - PLA me ABS.He mea tino roa me te pumau ka taea te tu atu i te wera nui me te wai, he mea pai mo te whānuitanga o nga tono ta.
Ko tetahi o nga painga nui o tenei kakawaea ko te ahua pumau me te iti o te whakaheke, ko te tikanga ka taea e koe te hanga tauira tika.Ko te pai o nga ahuatanga hiko o te kakawaea he mea tino pai mo nga waahanga hiko me nga taputapu.
It he pai mo te hanga i nga taarua marama, tae ranei me te kanapa teitei i runga i te matotoru o te pakitara me te oro.Ka taea e koe te whakatutuki i te ahua o te karaehe i runga i o kaupapa, he mea whakamiharo, he ataahua hoki.
He pai te PETG Filament Grey mo te hanga i nga taarua maramara, tae ranei ki te kanapa teitei i runga i te matotoru o te pakitara me te oro.Ka taea e koe te whakatutuki i te ahua o te karaehe i runga i o kaupapa, he mea whakamiharo, he ataahua hoki.
Ma tenei kakawaea, ka taea e koe te ta i nga tauira mahi me nga waahanga me te kaha me te mauroa.Na tenei he rauemi tino utu nui e hoatu ana ki a koe he hua pono me te wa roa mo te tini o nga tono.
Hei whakamutunga, ko te PETG Filament Grey he rauemi ta 3D tino pai me te maha o nga painga tae atu ki te teitei o te pāmahana me te aukati wai, te whakapumautanga o te ahu me te mutu kanapa.He pai te taiao, he ngawari ki te whakahaere, he hototahi ki te nuinga o nga kaituhi 3D i runga i te maakete.Ahakoa he tauhou koe, he tohunga ngaio ranei, ma tenei kakawaea e kapi katoa o hiahia mo te tuhi 3D.Na he aha te tatari?Tīmatahia te whakamahi i te PETG Filament Grey i tenei ra, ka kawe i o kaupapa ta ki te taumata e whai ake nei!
| Kiato | 1.27 g/cm3 |
| Taurangi Rere Rere(g/10min) | 20（250℃/2.16kg） |
| Wera Distortion Temp | 65℃, 0.45MPa |
| Te Kaha Toka | 53 MPa |
| Elongation at Break | 83% |
| Te Kaha Toka | 59.3MPa |
| Kōwae Takahuri | 1075 MPa |
| IZOD Te Kaha Paanga | 4.7kJ/㎡ |
| Te mauroa | 8/10 |
| Te Taatanga | 9/10 |
| Te Mahana Whakaputa (℃) | 230 – 250 ℃ |
| Te pāmahana moenga(℃) | 70 – 80°C |
| Rahi pupuha | ≥0.4mm |
| Tere Tere | HEI mo te kounga o te mata pai ake / OFF mo te kaha ake |
| Tere tā | 40 – 100mm/s |
| Moenga Wehana | E hiahiatia ana |
| Nga Mata Hangaia | Karaehe ki te kāpia, Pepa huna, Tape Kahurangi, BuilTak, PEI |
