Torwell ABS Filament 1.75mm mo te kaituhi 3D me te pene 3D
Nga waahanga hua
| Waitohu | Torwell |
| Rauemi | QiMei PA747 |
| Diamita | 1.75mm/2.85mm/3.0mm |
| Te taumaha kupenga | 1 Kg/spool;250g/spool;500g/spool;3kg/spool;5kg/spool;10kg/spool |
| Te taumaha kerekere | 1.2Kg/spool |
| Te manawanui | ± 0.03mm |
| Te roa | 1.75mm(1kg) = 410m |
| Taiao Rokiroki | He maroke me te hau |
| Tautuhinga whakamaroke | 70˚C mō te 6 hāora |
| Nga rauemi tautoko | Tonoa me Torwell HIPS, Torwell PVA |
| Whakaaetanga Tiwhikete | CE, MSDS, Reach, FDA, TUV, SGS |
| Hototahi ki | Makerbot, UP, Felix, Reprap, Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker me etahi atu kaituhi FDM 3D |
Ētahi atu Tae
Tae Wātea:
| Tae taketake | Ma, Pango, Whero, Kahurangi, Kowhai, Kakariki, Nature, |
| Tetahi atu tae | Hiriwa, Hina, Kiri, Koura, Mawhero, Papura, Karaka, Kowhai-koura, Rakau, Kirihimete matomato, tupuni kahurangi, Rangi kahurangi, Puata |
| Ko te raupapa korakora | Korekōrero Whero, Korekōrero Kōwhai, Korekōrero Kākāriki, Korekōrero Kahurangi |
| Te raupapa maramara | Maamaa Kakariki, Maamaa Kahurangi |
| He raupapa huringa tae | Kahurangi kakariki ki te kowhai kakariki, Kahurangi ki te ma, Papura ki te Mawhero, Kerei ki te Ma |
| Whakaaetia te Tae PMS Kiritaki |
Whakaaturanga Tauira
Mōkī
1kg pukapuka kakawaua ABS me te whakamaroke i roto i te kete korehau.
Ia poro i roto i te pouaka takitahi (pouaka Torwell, Pouaka Neutral, pouaka Whakaritea ranei e waatea ana).
8 pouaka mo ia kaata (kaata rahi 44x44x19cm).
Whare wheketere
Tuhipoka Nui
Tukuna koa te kakawaea i roto i te kohao kua whakaritea kia kore ai e kuru i muri i te whakamahinga.1.75 Ko te kakawaea ABS e hiahia ana he moenga wera me tetahi mata tuhi tika kia kore ai e pakaru.Ko nga waahanga nui ka kaha ki te pakaru i roto i nga kaituhi o te whare me te kakara ka kaha ake te ta i te PLA.Ma te whakamahi i te toki, te piriti, te whakaiti ranei i te tere mo te paparanga tuatahi ka kore e pakaru.
FAQ
He aha te take ka kore e taea e nga kakawaea te piri ki te moenga hanga?
1. Tirohia te tautuhinga pāmahana i mua i te tā, kakawaua ABS i teitei extrusion pāmahana;
2. Tirohia mehemea kua whakamahia te papa pereti mo te wa roa, ka tūtohu kia whakakapihia ki to maatau hou hei whakarite i te kaha o te paparanga tuatahi;
3. Mēnā he ngoikore te piri o te paparanga tuatahi, ka tūtohuhia kia whakaōrite anō te tïpako tā hei whakaiti i te tawhiti i waenga i te puha me te pereti mata;
4. Mena kaore i te pai te paanga, ka tūtohu kia whakamatauhia te tuhi i te tauira i mua i te tuhi.
| Kiato | 1.04 g/cm3 |
| Taurangi Rere Rere(g/10min) | 12（220℃/10kg） |
| Wera Distortion Temp | 77℃, 0.45MPa |
| Te Kaha Toka | 45 MPa |
| Elongation at Break | 42% |
| Te Kaha Toka | 66.5MPa |
| Kōwae Takahuri | 1190 MPa |
| IZOD Te Kaha Paanga | 30kJ/㎡ |
| Te mauroa | 8/10 |
| Te Taatanga | 7/10 |
| Te Mahana Whakaputa (℃) | 230 – 260 ℃E taunaki ana kia 240 ℃ |
| Te pāmahana moenga(℃) | 90 – 110°C |
| Rahi pupuha | ≥0.4mm |
| Tere Tere | HEI mo te kounga o te mata pai ake / OFF mo te kaha ake |
| Tere tā | 30 – 100mm/s |
| Moenga Wehana | E hiahiatia ana |
| Nga Mata Hangaia | Karaehe ki te kāpia, Pepa huna, Tape Kahurangi, BuilTak, PEI |
