Miro Pūreretā 3D muka waro Torwell PLA, 1.75mm 0.8kg/pōro, Pango Mārō
Ngā Āhuatanga o te Hua
Ko ngā miro muka waro he rauemi hiato i hangaia mā te whakaranu i ngā maramara muka waro ki roto i te turanga polymer, he rite ki ngā miro kua whakaranua ki te konganuku engari he muka ririki. Ka taea te hanga i te turanga polymer mai i ngā rauemi tā 3D rerekē, pērā i te PLA, ABS, PETG, nairona rānei, me ētahi atu.
He kaha ake, he pūmau te āhua, he pai te āhua o te mata. He mama, ā, he pai tēnei miro 3D mō ngā kaihanga taraka rererangi me ngā kaiwhaiwhai RC.
| Brand | TŌreira |
| Rauemi | 20% muka waro whakapūmau-teitei i whakakotahihia ki80%PLA (NatureWorks 4032D) |
| Diameter | 1.75mm/2.85mm/3.0mm |
| Taumaha kupenga | 800g/pōro; 250g/pōro; 500g/pōro; 1kg/pōro; |
| Taumaha katoa | 1.0Kg/pōro |
| Manawanui | ± 0.03mm |
| Lroa | 1.75mm800g) =260m |
| Taiao Rokiroki | Maroke, ā, he hauhautanga |
| Tautuhinga Whakamaroke | 55˚C mō ngā haora 6 |
| Ngā rauemi tautoko | Tono kiTOrwell HIPS, Torwell PVA |
| Whakaaetanga Tiwhikete | CE, MSDS, Reach, FDA, TUV me SGS |
| Hototahi ki | Makerbot, UP, Felix, Reprap, Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker me ētahi atu pūreretā FDM 3D |
| Mōkihi | 1kg/pōro; 8 ngā pōro/ctn, 10 rānei ngā pōro/ctnputea kirihou hiri me ngā whakamaroke |
Ētahi atu Tae
Mōkihi
Whare wheketere
He kaihanga tino pai a Torwell, he nui ake i te 10 tau o ana wheako ki te miro tā 3D.
He aha te take he miro muka waro PLA?
He mea hanga te Torwell PLA-CF i te waro PLA 1.75mm, he kaha teitei, he pakari hoki, ā, he pai te pakari. He tino ataahua hoki te āhua o te miro muka waro PLA o te pūreretā 3D, he āhua satin me te āhua matte, e ātaahua ai te āhua o te tānga.
Ka honoa te muka waro (kei roto ko te 20% o te muka waro, te taumaha) ki te PLA hei hanga i tētahi kirihou kaha, he mea tino pai mō te tā i ngā taonga e hiahia ana kia kaha ake, kia kaha ake te whakakoi i te PLA paerewa.
Tuhipoka Hira
A. He pakarukaru ake te muka waro i te PLA paerewa i roto i tōna āhua miro, nō reira kaua e piko, engari kia tupato te pupuri kia kore ai e whati.
B. Ka tūtohu mātou kia whakamahia he pūwero 0.5mm, he nui ake rānei, kia kore ai e purua rawatia.
C. Tāutahia he pūwero ātete-kiri ki tō pūreretā i mua i te tānga ki te Torwell PLA-CF pērā i te pūwero kowiri tira. Nā te mea he tairongo ake te muka waro PLA ki te makuku, kia kaua e whakamahia ki te taiao makuku nui, ā, whakahokia ki te pouaka hiri anō i muri i te whakamahinga.
Ngā Pātai Auau
A: Ko te muka waro Torwell he mea hanga i te muka waro tapatapahi.
A: 1-3mm
A: He waenga te modulus o ngā muka waro Torwell.
A: Tata ki te 20% te nui o te muka waro o te miro Torwell pla.
| Kiato | 1.32 karamu/cm3 |
| Taupū Rere Rewa (g/10min) | 5.5（190℃/2.16kg） |
| Te Mahana Whakarerekētanga Wera | 58℃, 0.45MPa |
| Kaha Kume | 70 MPa |
| Te Toronga i te Wā Whakamutu | 32% |
| Kaha Whakapiko | 45MPa |
| Te Tauwehenga Piko | 2250MPa |
| Te Kaha Pānga o IZOD | 30kJ/㎡ |
| Te pakari | 6/10 |
| Te āheinga ki te tā | 9/10 |
| Te pāmahana o te kaiwhakaputa (℃) | 190 – 230℃215 i tūtohutia℃ |
| Te pāmahana moenga (℃) | 25 – 60°C |
| NoRahi o te zzle | ≥0.5mmHe pai ake te whakamahi i ngā Pūwero Rino Kua Whakapakeketia. |
| Tere o te Pā | I te 100% |
| Tere Tā | 40 –80mm/s |
| Moenga Wera | Kōwhiringa |
| Ngā Papa Hanga e Manakohia ana | Karāhe me te kāpia, Pepa hipoki, Rīpene kikorangi, BuilTak, PEI |
